|
 XM2-HP Series
- New high efficiency transformer reduces energy consumption by an average of 3%
- 6, 15, and 22A models available for optimal load matching
- Next Generation microprocessor with double the memory capacity
- New communications menu with expanded DOCSIS® menu
- Expanded operational menu
- Enhanced set-up menu
- Backwards compatible with XM Series 2 CableUPS
Alpha's High Performance XM Series 2 CableUPS is the answer to the higher energy costs associated with running today's cable networks. The XM2-HP power supply features a high effi ciency transformer with lower power losses, lower power consumption, and lower Life Cycle Costs. This new 'green' power supply can greatly reduce the carbon footprint of the entire cable plant by running more effi ciently 24/7. Additional features include an enhanced Smart Display with improved menus and dedicated Communications menu with DOCSIS® parameters. The XM2-HP is available in three convenient power ratings for load matching to operate at optimal efficiency.
brochure
High Performance XM Series 2
Electrical Specifications
|
XM2-906HP |
XM2-915HP |
XM2-922HP |
| Input Voltage (Vac): |
120 / 240 |
120 / 240 |
200 / 240 |
| Power Factor: |
>0.90 @ full load |
>0.90 @ full load |
>0.90 @ full load |
| Input Voltage Tolerance: |
-30% to +20% |
±15% |
±15% |
| Input Frequency: |
60Hz |
60Hz |
60Hz |
| Frequency: |
±3% |
±3% |
±3% |
| Output Voltage (Vac): |
63 / 87 |
63 / 75 / 87 |
63 / 75 / 87 |
| Output Current (A): |
8 / 6 |
15 |
22.5 |
| Max Output Power (VA): |
525 |
1350 |
2025 |
| Waveform: |
Quasi-square wave |
| Voltage Regulation: |
±5% |
| Output Frequency Stability: |
±0.05% inverter mode, ±1% normal mode |
| Short Circuit Current: |
150% of maximum current rating |
| Transformer Efficiency: |
93% typical line mode, 87% typical standby mode |
| Transfer Characteristics: |
Uninterrupted output |
| Typical Standby Time (min): |
360 |
125 |
110 |
| Battery Voltage (Vdc): |
36 |
36 |
48 |
| Approx. Weight: |
60/27 |
70/32 |
92/42 |
Battery Charger Specifications
| Temperature Compensation: |
Programmable (0 to 5mV/Cell/°C) |
| Charger Current: |
10A at 80% load and nominal input (bulk charge mode) |
| Three Stage: |
Bulk, accept, float |
Mechanical Specifications
| Status Display: |
2 x 20 LCD with backlight |
| Dimensions |
| H x W x D (in/mm): |
8.8 x 15 x 13 / 222 x 381 x 330 |
| Finish: |
Black, epoxy powdercoat |
Environmental Specifications
| Operating Ambient Temp.: |
-40 to 55°C (-40 to 133°F) |
| Relative Humidity: |
0 to 95% non-condensing |
| Agency Compliance: |
FCC Part 15 Class A, UL1778, CSA 22.2 No. 107.1-M95 |
| Smart Display Features: |
Output current, Input frequency, Battery voltage, Battery temperature, Output VA, Standby time, DOCSIS® parameters, Built-in diagnostics, Output power (W), Output voltage, % load, Input voltage, Charger current, Number of events |
Note: General Specifications reference most commonly used models. For model-specific information, consult product manual. Other voltages and configurations may be available. For more information, contact your sales representative.
|
|
